What is the Dahua Nkb1000 Not Showing In Config Tool

Dahua Nkb1000 Not Showing In Config Tool
The Dahua Nkb1000 Not Showing In Config Tool WiFi Network Camera is a network camera as well as a monitoring and smart home security system. It offers several unique features, like night vision, motion detection, real-time HD streaming, etc., making it the ideal solution for residential and commercial security. You may easily instal it on your own, link it to a PC, Mac, or smartphone, and use the Dahua APP to monitor your house from anywhere at any time. The camera is appropriate for interior usage and can operate without a power source for 24 hours. Your family will benefit from its convenient features and powerful performance thanks to its distinctive design.

How is the Dahua NKB- 1000 camera set up?


Download and instal the Dahua app on your Android or Apple smartphone (iPad/iPhone). Before installing the camera, you’ll need to download the app if it isn’t already on your smartphone.

Step 2.

Install the Dahua Nkb1000 Not Showing In Config Tool driver software, which often comes with the camera, after connecting the camera to your computer with an Ethernet wire.

Step 3.

Open the Dahua APP on your device when the installation is finished to verify that both devices are correctly linked.

If everything is in order, select “Camera” from the “Networks” menu.

Step 4.

Tap “Add Device.” Click the OK button after entering the camera’s IP address, which is

Step 5.

Click the “Settings” tab after selecting “IP Camera”. Depending on whether you are utilising a wireless or cable connection, choose the appropriate mode. Change the resolution to 1280×720 and then click “Save” to ensure that your camera functions properly.

Step 6.

Return to the Home screen and click the button on the left side of the screen to access the camera that has been installed.

Dahua Nkb1000 Not Showing In Config Tool

Press the On/Off switch on the camera’s top right corner to manually turn it on, then wait until the light goes green.

When everything is ready, hit the “Start Recording” button on the front panel’s bottom centre to begin recording.

Step 7.

Simply click the same button once more to cease recording and turn the camera off.

Please be aware that the camera may lose the data and cease to function if the application is closed while the camera is still recording. Therefore, kindly leave the programme open till the recording is finished.


Leave a Reply

Your email address will not be published. Required fields are marked *